Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

11-Digit Dial vs. 10-Digit Dial

We have a new SIP provider and they are looking for me to send 11 instead of 10 digits. I am trying to figure out a way that instead of having the users dial a 1 for every call I can preface all outgoing calls with a 1 to make my 11 digits and I am not sure how to do this through CUCM 8.0.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: 11-Digit Dial vs. 10-Digit Dial

Do you have a sip trunk to the provider ? Are you using a route pattern to route the calls over the SIP trunk , if

yes you can prefix 1 and discard predot on the route pattern (if the pattern is something like 9.)

1 REPLY
Cisco Employee

Re: 11-Digit Dial vs. 10-Digit Dial

Do you have a sip trunk to the provider ? Are you using a route pattern to route the calls over the SIP trunk , if

yes you can prefix 1 and discard predot on the route pattern (if the pattern is something like 9.)

200
Views
0
Helpful
1
Replies