Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2 phones ringing at the same time

I have a CME 3.3 and I have a 7940 with extension 100 as operator, so all incoming calls from the PSTN goes to that extension directly (100) and the secretary forward the calls to the other extensions.

I'd like to have 2 phones as operator, so 2 phones rings at the same time, i.e. extension 100 and 101 rings at the same time when receive an incoming call and the phone is picked up with the first secretary that can take it.

How can I do it?

regards

2 REPLIES

Re: 2 phones ringing at the same time

ephone-dn 1 dual-line

number 100

ephone 1

button 1:1

ephone 2

button 1:1

Now this is a shared line. When a call comes in it will ring both phones.

HTH

Sankar

PS: please remember to rate posts!

Hall of Fame Super Silver

Re: 2 phones ringing at the same time

You can make the 100 ephone hunt pilot, and assign anoterh DN to this phone, and put both phones in the ephone hunt group, such as:

ephone-hunt 1 sequential

pilot 100

list 101, 102

final 103 <-- VM Pilot for example

http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme33/cme33sa/cme33cvg.htm#wp2175404

Other option could ve forward no answer.

HTH,

Chris

116
Views
6
Helpful
2
Replies