I've been setting up a 2621XM with the purpose of connecting a SIP trunk to an FXS port to make/receive calls. I have everything working, save for these last two issues I've come across:
The router is successfully registering to the SIP provider. However, the configuration necessary to have the FXS port to ring (dial-peer 3001) is also causing the router to try and register against the SIP server with that number (1011) as well. Is there any way to prevent this?
Incoming calls work fine -- the FXS port rings and conversations can occur. However, when the remote party hangs up -- the FXS port does not go back on-hook. How can I ensure this happens?
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4