Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2800 IOS Bug

When upgrading to an IOS that supports SRST 4.0, I have found that now there is a digit delay when using an outside vendors' IVR.

Using IOS c2800nm-adventerprisek9-mz.124-9.T1.bin or c2800nm-spservicesk9-mz.124-11.XW3.bin there is a noticeable delay.

If I downgrade back to the IOS c2800nm-spservicesk9-mz.123-11.T10.bin then I don't get the delayed response.

Has anyone discovered a work around?

SRST 4.0 is needed because it recognizes the 7941 and 7961 phones.

1 REPLY
New Member

Re: 2800 IOS Bug

Solution: Problem was incompatibility with DSP 5.0 (which was a solution for echo problem) Need to delete DSP 5.0 and then reload router for new DSP firmware to update - Which in our case was 8.4.6.

117
Views
0
Helpful
1
Replies
CreatePlease login to create content