Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

2801 - ccme.html - does it exist?

As above, can I access the web config part by using the above address on my 2801? I try it but IE just says 'done' and displays a blank white screen.

7 REPLIES

Re: 2801 - ccme.html - does it exist?

You need to flow through some additional steps to be able to use the GUI. I have posted below a guide to help you through enabling the gui.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmegui.html

Re: 2801 - ccme.html - does it exist?

I'm experiencing the same issue.  What was the resolution?

Hall of Fame Super Gold

Re: 2801 - ccme.html - does it exist?

The one given above.

Or, you may be using the wrong version GUI files for the running IOS.

Re: 2801 - ccme.html - does it exist?

How do I verify if I have the wrong version?

Here is a debug from an attempted login.

Oct 11 17:10:40.979: its_urlhook url: /ccme.html, method 1
Oct 11 17:10:40.979: Mon, 11 Oct 2010 17:10:40 GMT 10.0.0.88 /ccme.html auth_req
uired
        Protocol = HTTP/1.1 Method = GET
Oct 11 17:10:40.979:
--More--
Oct 11 17:10:46.971: its_urlhook url: /ccme.html, method 1
Oct 11 17:10:46.983: HTTP: Priv level granted 15
Oct 11 17:10:46.983: Mon, 11 Oct 2010 17:10:46 GMT 10.0.0.88 /ccme.html ok
        Protocol = HTTP/1.1 Method = GET
Oct 11 17:10:46.983:
Oct 11 17:10:46.987: telephony_service_server_get_action url:/ccme.html

Here is the IOS.

flash:c2800nm-adventerprisek9_ivs-mz.124-22.T5.bin

Hall of Fame Super Gold

Re: 2801 - ccme.html - does it exist?

You need to download the files specific for your version.

Anyway, the GUI is next to garbageware, so you're not loosing much.

Re: 2801 - ccme.html - does it exist?

Appreciate it.  I agree about the gui, however this is for lab purposes only.

New Member

2801 - ccme.html - does it exist?

Even though you won't be able to see ccme.html file on the flash but it would still work.

I had same issue. However I was able to fix it.

First, make sure you have the correct files extracted. Use this command:

archive tar /xtract tftp://xxx.xxx.xxx.xxx/file.tar flash:/

Secondly, make a note if you created a folder on flash and put the GUI files on there? If you did that, you will have modify ip http server command on the router.

I extracted the files to this folder on flash:

Flash:CME8.6.0GUI

So I modified the ip http command to:

ip http path flash:CME8.6.0GUI

Then it should work.

1523
Views
0
Helpful
7
Replies
CreatePlease to create content