Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

2801 cme download

I recently purchased from ebay a 2801 router that is voice capable.  I have also purchased a couple of phone.  How can I download CME on this router to play with it?  It is running 12.4

2 ACCEPTED SOLUTIONS

Accepted Solutions

2801 cme download

Joli,

If you meant how to enable the GUI for CME then please refer " Enabling GUI " section.

GP.

Pls rate helpful posts by clicking on stars below the post !!

Hall of Fame Super Gold

2801 cme download

IOS 15.1(4)M, CME 8.6

Please remember to rate useful posts clicking on the stars below.

12 REPLIES
Hall of Fame Super Gold

2801 cme download

If it is running a voice or greater image, CME is already embedded in there.

Otherwise, most downloads on cisco.com require a paid support contract.

Cisco Employee

Re: 2801 cme download

Try running the show telephony-service command.

If it show an output like the following it means that the GW is running an image that has the feature enabled.

CONFIG (Version=8.1)

=====================

Version 8.1

Max phoneload sccp version 17

Max dspfarm sccp version 18

Cisco Unified Communications Manager Express

For on-line documentation please see:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html

(output ommited)

If it says that the service is not enabled try enabling it by running the commands below:

conf t

telephony-service

New Member

Re: 2801 cme download

I was able to enable the telephony-service, now how can I enable the web server to configure the call manager?

2801 cme download

Joli,

If you meant how to enable the GUI for CME then please refer " Enabling GUI " section.

GP.

Pls rate helpful posts by clicking on stars below the post !!

New Member

2801 cme download

I followed the steps to enable the GUi but the gui shows up blank.  and when I do a sh flash it just shows the current ios and not files.

2801 cme download

New Member

2801 cme download

to download this will I need a subscription or can I just purchase it? 

2801 cme download

downloading software is always charged process but if your CCO ID already has the support contract associated with it, then it's free for you. Try logging in to the page & if you are able to download it then it means you have the necessary contract associated & you can download multiple softwares as many time as you wish from CCO

GP.

Pls rate helpful posts !!

New Member

2801 cme download

nope my id doesnt have access to it. but thx anyways.

New Member

2801 cme download

my router is running version 12.4(13r)T.  What is the latest version of CME that my router will support?

Hall of Fame Super Gold

2801 cme download

IOS 15.1(4)M, CME 8.6

Please remember to rate useful posts clicking on the stars below.

Cisco Employee

2801 cme download

If your ISR has already a CME flavor you can do all the config via CLI, you do not necessarily need the GUI.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
2733
Views
5
Helpful
12
Replies
CreatePlease to create content