Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

2801, installing a vwic2 t1 card

Hi all, how did you go about installing this card? Any special commands? Mine isnt showing up as an interface after installing it, but it does appear on a show diag.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: 2801, installing a vwic2 t1 card

For the PRI, refer to the port as 0/2/0:15

You can ignore the other identifiers.

Note depending on where you are, you can make outside call without using 9. Just have extensions all begin with a digit not used by your contry. Users like that very much because it's like calling from home.

7 REPLIES
Hall of Fame Super Gold

Re: 2801, installing a vwic2 t1 card

You need to configure a pri group or cas group or channel group under controller depending what you're trying to do.

Community Member

Re: 2801, installing a vwic2 t1 card

Hi mate. As im coming at this from my UC520 background then doing all this manually is all new :)

OK I think ill need to set up a pri group then as its going to be connecting to an ISDN 30 connection.

Any idea on how to do that mate?

Cheers :)

Hall of Fame Super Gold

Re: 2801, installing a vwic2 t1 card

controller e1 x/y/z

pri-group

Community Member

Re: 2801, installing a vwic2 t1 card

ah spot on as ever! thats worked great, I now have int 0/2/0 alive.. but I also have 0/2/0:0, 0/2/0:1, 0/2/0:2...... which are my PRI group I assume.

On my old dial-peers for my UC520 I used to just do something like this:

dial-peer voice 54 pots

description ** Outbound International Call **

preference 1

destination-pattern 900T

port 0/1/0

prefix 00

no sip-register

Is just using 0/2/0 going to work just as well now?

Hall of Fame Super Gold

Re: 2801, installing a vwic2 t1 card

For the PRI, refer to the port as 0/2/0:15

You can ignore the other identifiers.

Note depending on where you are, you can make outside call without using 9. Just have extensions all begin with a digit not used by your contry. Users like that very much because it's like calling from home.

Community Member

Re: 2801, installing a vwic2 t1 card

Exellent man thats great. Cheers for your help!

Hall of Fame Super Gold

Re: 2801, installing a vwic2 t1 card

You are welcome, thanks for the nice rating and good luck!

288
Views
3
Helpful
7
Replies
CreatePlease to create content