Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

2801 with FXS ports to Call Manager

Hello

I have a call manager 4.1 and 2801 h323 gateway with fxs .

what is happening right now is my analog phone on fxs can make a call hairpinning the router without callmanager.

I have to get callmanager to handle the call So I create a voip dialpeer 8. that sends the analog phone digits to callmanager (this works)and a new route pattern with #8xxxxxxx (send to gw)and a pots dialpeer #8 (to pstn). but when the digits get back to the gateway it still uses 8. voip peer. never gets to pstn.

Does anyone else run in to this problem.

1 REPLY
Community Member

Re: 2801 with FXS ports to Call Manager

dial-peer voice 9000 pots

description Local Calling via FXO

preference 3

destination-pattern 8[2-9]......

port 0/1/0

forward-digits 7

104
Views
0
Helpful
1
Replies
CreatePlease to create content