02-26-2008 05:08 AM - edited 03-15-2019 09:04 AM
Hi,
I have got a 2821 router with c2800nm-entservicesk9-mz.124-10.bin IOS.
I would like to upgrade it to manage voice services and connect it to a Call Manager cluster.
Do I just need to uprade the IOS version to a Voice one or do I have also to perform an hardware upgrade ?
02-26-2008 05:15 AM
the base hardware is fine.
what exactly do you want to do with it?
do you have any voice interfaces? DSPs?
02-26-2008 05:30 AM
I want to use this router for voice.
I will have 2 E1 links, some FXS ports and first about 30 ip phones and later up to 500 ip phones.
I do not necessarely need SRST mode.
About DSP, how do I know what I need ?
Thanks for your help
02-26-2008 10:39 AM
Hi, For 2 E1 links and "some FXS ports", you need a PVDM2-64, then if you have more than 8 FXS ports , and addtional PVDM2-8 (minimum).
Hope this helps, please rate post if it does!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: