Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2901 VIC2-4FXO MGCP PSTN Breakout Call rings connects but NO Audio

hi there guys,


we have a 2921 with a VIC2-4FXO out on a site in India the clients phones register over a managed MPLS network to a centralised CUCM cluster

the client wanted to break local calls out of analogue lines; the router is registered as an MGCP gateway to the CUCM cluster 

to breakout locally they use 9 when making a call; the call goes out correctly ringing can be heard and the call connects 

once the call connects though there is no audio at all have got the client to dial mobile and landline numbers to test

the two interesting things i see in the debug are below


voip_rtcp_stop_session: ERROR - Dest IP Addr=0, no RTCP pkt sent
voip_rtp_get_gccb:Error, no gccb for callID



i have attached scrubbed router config, voice port summary and debug for an outbound call for reference


any pointers would be gratefully recieved 




Is the phone able to ping the

Is the phone able to ping the IP assigned to interface GigabitEthernet0/1.6 assigned on the gateway?

Please rate useful posts.
New Member

hi george,thanks for taking

hi george,

thanks for taking the time to respond 

i can ping between the devices see attached


CreatePlease login to create content