Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2911 gtw knowing number of calls in snmp

Hi is there on

on a 2911 a mib oid to supervise per E1/T1 links   the number of active calls on it?

i can't find it

thanks

1 ACCEPTED SOLUTION

Accepted Solutions

2911 gtw knowing number of calls in snmp

Hi Alain.

This mib will give you the total calls value as returned by the command show voice call status

SNMPv2-SMI::enterprises.9.9.63.1.3.3

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
5 REPLIES

2911 gtw knowing number of calls in snmp

Hi Alain.

This mib will give you the total calls value as returned by the command show voice call status

SNMPv2-SMI::enterprises.9.9.63.1.3.3

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
New Member

2911 gtw knowing number of calls in snmp

thanks

i found another one after all

1.3.6.1.4.1.9.9.63.1.3.3.0 just found that the last 0 is important!

unfortunately it seems nothing is planned to be able to split by E1 link

there's just a common valmue and not by bearer

Re: 2911 gtw knowing number of calls in snmp

Yes Alain,
My mib was incomplete.
Sorry :)
For one of my customer I found a mib countig calls matching a particular dialpeer.
If you think that could be usefull for you, I can check on customer monitoring tool and send you here.

Let me know


Regards

Carlo

Sent from Cisco Technical Support iPhone App

Please rate all helpful posts "The more you help the more you learn"
New Member

Re: 2911 gtw knowing number of calls in snmp

yes that would be great as each of my e1 link have a specific dial peer

thanks for helping

New Member

Re: 2911 gtw knowing number of calls in snmp

I found this table cvPeerCfgEntry

.1.3.6.1.4.1.9.9.63.1.3.8.4

that gives the list of in and out per dial peer it looks the best thing we can find

is it this one you were talking?

thanks

Alain

222
Views
0
Helpful
5
Replies
CreatePlease login to create content