All is working fine and the conference is registered. When I reload the router, the PVDM in slot 2 (so the PVDM3-32) is showing an amber light.
when I shutdown the dspfarm profile 1 conference, the light turns green and stays green when I do a no shut.
A second strange behaviour we have is the following. We have configured a trunk-group on 2 of our e1 controllers. whenever we reload the router, this configuration disappears (yes the config is saved before doing the reload).
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...