Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3640 Serial Module WIC1T ISDN Capable??

I have a 3640 with a WIC1T serial module in the WIC slot. Is it possible to configure a chanellised T1 for voice on this interface. Or do I have to use a channelised T1 WIC. I will be connecting this interface to another 3640 with the same interface using a rolled serial cable. One router will act as a branch office voice router the other router will be an configured as an ISDN switch.

Andy

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: 3640 Serial Module WIC1T ISDN Capable??

You are welcome. Please remember to rate useful posts with the scrollbox below.

3 REPLIES
Hall of Fame Super Gold

Re: 3640 Serial Module WIC1T ISDN Capable??

No, you cannot use that for ISDN or channelized T1. You will need a specific channelized interface to do that.

New Member

Re: 3640 Serial Module WIC1T ISDN Capable??

Thankyou for the clarification.

Andy

Hall of Fame Super Gold

Re: 3640 Serial Module WIC1T ISDN Capable??

You are welcome. Please remember to rate useful posts with the scrollbox below.

134
Views
0
Helpful
3
Replies