I have a client who needs 10GB for new 3750X. Just curious are the following correct?? My customer wants three 3750X, with four 10GB uplinks:-
WS-C3750X-48PF-L Catalyst 3750X 48 Port Full PoE LAN Base 3 S375XVK9T-12258SE CAT 3750X IOS UNIVERSAL WITH WEB BASE DEV MGR 3 C3KX-PWR-1100WAC/2 Catalyst 3K-X 1100W AC Secondary Power Supply 3 C3KX-NM-10G Catalyst 3K-X 10G Network Module option PID 3 CAB-STACK-50CM Cisco StackWise 50CM Stacking Cable 3 CAB-3KX-AC-AP AC Power Cord for Catalyst 3K-X (Australia) 6
Q1a) Are these the correct 10G modules to use for 3750X with C3KX-NM-10G?? Otherwise, which 10G modules should i use for the 10G Connections?
X2-10GB-SR 10GBASE-SR X2 Module
Q1b) I saw some which just has the following:
SFP-10G-SR= 10GBASE-SR SFP Module
Q1c) Do i even need to have the C3KX-NM-10G module at all??
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...