Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3845 DSP Resource Issue

Hello,

I have 2 3845 rtr's each with 2 64channel dsp cards. When I try to physically move one of my VWIC-2-2MFT-T1 cards onto one of the NM modules and configure it as a T1 CAS it states I do not have enouph dsp resources available.

Now if I put that same card back on the HWIC slot at the top of the rtr and configure the exact same card it works.

I think thier is a break in dsp resource availabilty between the motherboard of the rtr and the NM modules, eventhough they all sit on the same rtr (chassis)?

Input would be appreciated, thanks in advance.

1 REPLY
Green

Re: 3845 DSP Resource Issue

what about network clock participate command

or dsp services dspfarm command?

114
Views
0
Helpful
1
Replies