05-07-2008 10:16 PM - edited 03-15-2019 10:31 AM
I have a 3845 router with two BRI interfaces, and one CCM 5.0(4) and I need to configure MGCP between them, I'm not able to get the getway regestered!
here is the router conf:
isdn switch-type basic-net3
voice-card 0
no dspfarm
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
supplementary-service h450.12
h323
!
voice class codec 1
codec preference 1 g729r8
!
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 10.65.60.4
ccm-manager config
!
voice-port 0/1/0
compand-type a-law
cptone JO
timeouts interdigit 3
connection plar 100
!
voice-port 0/1/1
compand-type a-law
cptone JO
timeouts interdigit 3
connection plar 100
!
mgcp
mgcp call-agent GetCCM 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode cisco
mgcp rtp unreachable timeout 1000 action notify
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
!
mgcp profile default
05-07-2008 11:51 PM
hi
Check the remote gateway can reach TFTP and DNS server?
05-08-2008 03:52 AM
yes it can reach the CCM and the DNS server.
05-08-2008 11:18 AM
try just using IPs and not hostnames, do a no mgcp / mgcp
verify the server model in CUCM along with the right slot selected and that the domain name is hostname + domain (if configured)
are the BRI's up and running??
HTH
javalenc
if this helps, please rate
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: