04-23-2012 09:31 AM - edited 03-16-2019 10:47 AM
I saw all the posts for this phone.
I dont see on which version of CME is supported.
Also Im testing the c2900-universalk9-mz.SPA.151-4.M4.bin on a 2901 but it do not give me the option to load the firmware for this phone
in the voice register global section.
CME(config-register-global)#load ?
3911 Select the firmware load file for 3911
3951 Select the firmware load file for 3951
7905 Select the firmware load file for 7905
7906 Select the firmware load file for TNP 7906 phone
7911 Select the firmware load file for TNP 7911 phone
Question: wich IOS do I need install on the 2901?
Thanks.
Solved! Go to Solution.
04-23-2012 10:03 AM
Hi,
The 3905 phone is not supported till CME ver 8.8
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme88spc.html
Recommended IOS for 8.8 is
15.2(1)T
Also bookmark this page for info on all CME releases
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
Regards
Alex
04-23-2012 10:03 AM
Hi,
The 3905 phone is not supported till CME ver 8.8
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme88spc.html
Recommended IOS for 8.8 is
15.2(1)T
Also bookmark this page for info on all CME releases
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
Regards
Alex
04-23-2012 12:42 PM
Thanks Alex, I will try the 15.2(1)T.
07-02-2020 01:36 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: