Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

3COM SIP PhoneRegistering to CUCM

                

       I have a 3COM 3101 SIP phone that I am trying to add to a Cisco Call Manager 7.1. Please if you have any previous experience with this kindly drop a note as I have been on this for close to a week without success.

Regards,

3 REPLIES
Blue

3COM SIP PhoneRegistering to CUCM

Hi

3COM SIP phone are not tested to work with Cisco CUCM and may not get regestered.  Below link shows tested products.

http://www.tekvizion.com/3rdpartyprograms/sip_verification/verified_products.php

But in general if you add them as third party sip phone , you can have basic functionality. What error you are seeing on 3 COM phone.

regards

Ronak patel

Rate helpful posts.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
New Member

3COM SIP PhoneRegistering to CUCM

It keeps resetting from time to time and displaying the message "Connecting to NCP"

Blue

3COM SIP PhoneRegistering to CUCM

Hi, 

Problem might be with 3Com phones. 3com phone needs to connect to the PBX to download
the SIP load every time it boots and CUCM do not have load for it.
See if you have any way to disable this feature in 3COM phone

Regards
Ronak Patel

rate helpful posts.
Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
548
Views
0
Helpful
3
Replies