Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3rd party SIP device (gigaset) registration to CME fails

Hello,

I am trying to get some 3rd party devices (gigaset DECT gateway 192.168.0.22) to register to a CME (192.168.0.79) box.

I have 3 x extensions configured on the Gigaset but I am getting SIP errors :-

000226: Sep 23 18:00:36.779: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_reg_search_call_id_table: No entry found in sipCallID Table

000227: Sep 23 18:00:36.779: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_validate_own_ip_addr: ReqLine IP addr does not match with host IP addr

000228: Sep 23 18:00:36.783: //49/E232B6C88021/SIP/Error/ccsip_spi_register_incoming_registration: Error during REGISTER for contact - 192.168.0.22 148

000229: Sep 23 18:00:36.783: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_ipip_PassthruContentContainerFreeHelper: Null ContentQ - Exit

The important bits of the config :-

voice service voip

ip address trusted list

  ipv4 0.0.0.0 0.0.0.0

no ip address trusted authenticate

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to sip

sip

  bind control source-interface FastEthernet0/0

  bind media source-interface FastEthernet0/0

  registrar server expires max 120 min 60

voice register global

mode cme

source-address 192.168.0.79 port 5060

max-dn 10

max-pool 10

load ATA SIPDefault.cnf

authenticate register

authenticate realm all

tftp-path flash:

create profile sync 0004623540902042

!

voice register dn  1

number 144

call-forward b2bua noan 100 timeout 20

allow watch

name 144

label 144

!

voice register dn  2

number 145

call-forward b2bua noan 100 timeout 20

allow watch

name 145

label 145

!

voice register dn  3

number 148

call-forward b2bua noan 100 timeout 20

allow watch

name 148

label 148

!

voice register pool  1

id mac 1111.1111.1111

type ATA

number 1 dn 1

dtmf-relay rtp-nte sip-notify

username 144 password 144

codec g711ulaw

!

voice register pool  2

id mac 2222.2222.2222

type ATA

number 1 dn 2

dtmf-relay rtp-nte sip-notify

username 145 password 145

codec g711ulaw

!

voice register pool  3

id mac 3333.3333.3333

type ATA

number 1 dn 3

dtmf-relay rtp-nte sip-notify

username 148 password 148

codec g711ulaw

Here's a debug ccsip error & ccsip messages :-

000225: Sep 23 18:00:36.775: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Received:

REGISTER sip:192.168.0.79 SIP/2.0

Via: SIP/2.0/UDP 192.168.0.22:5060;branch=z9hG4bK29b5ed11d73d42d113320c018fa2b75;rport

From: "148" <sip:148@192.168.0.79>;tag=971336543

To: "148" <sip:148@192.168.0.79>

Call-ID: 1651868960@192_168_0_22

CSeq: 2 REGISTER

Contact: <sip:148@192.168.0.22:5060>

Authorization: Digest username="148", realm="all", qop=auth, algorithm=MD5, uri="sip:192.168.0.79", nonce="70DD181600048BD9", nc=00000001, cnonce="30b116ca9a5cecaa8077cd07fbb082c1", response="5374b412f7c295ac13bf5b6175869799"

Max-Forwards: 70

User-Agent: N720-DM-PRO/70.040.00.000.000

Expires: 60

Allow: INVITE, ACK, CANCEL, BYE, OPTIONS, INFO, REFER, SUBSCRIBE, NOTIFY

Content-Length: 0

000226: Sep 23 18:00:36.779: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_reg_search_call_id_table: No entry found in sipCallID Table

000227: Sep 23 18:00:36.779: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_validate_own_ip_addr: ReqLine IP addr does not match with host IP addr

000228: Sep 23 18:00:36.783: //49/E232B6C88021/SIP/Error/ccsip_spi_register_incoming_registration: Error during REGISTER for contact - 192.168.0.22 148

000229: Sep 23 18:00:36.783: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_ipip_PassthruContentContainerFreeHelper: Null ContentQ - Exit

000230: Sep 23 18:00:36.787: //49/E232B6C88021/SIP/Msg/ccsipDisplayMsg:

Sent:

SIP/2.0 100 Trying

Via: SIP/2.0/UDP 192.168.0.22:5060;branch=z9hG4bK29b5ed11d73d42d113320c018fa2b75;rport

From: "148" <sip:148@192.168.0.79>;tag=971336543

To: "148" <sip:148@192.168.0.79>;tag=2D7678-22D

Date: Mon, 23 Sep 2013 18:00:36 GMT

Call-ID: 1651868960@192_168_0_22

Server: Cisco-SIPGateway/IOS-12.x

CSeq: 2 REGISTER

Content-Length: 0

000231: Sep 23 18:00:36.787: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Sent:

REFER sip:148@192.168.0.22:5060 SIP/2.0

Via: SIP/2.0/UDP 192.168.0.79:5060;branch=z9hG4bKEAA9

From: <sip:192.168.0.79>;tag=2D76A0-2113

To: <sip:148@192.168.0.22>

Call-ID: E238D0F0-23B011E3-8022ADAE-F94440D4@192.168.0.79

CSeq: 101 REFER

Max-Forwards: 70

Contact: <sip:192.168.0.79:5060>

User-Agent: Cisco-SIPGateway/IOS-12.x

Timestamp: 1379959236

Require: norefersub

Refer-To: cid:0297948

Content-ID: <0297948>

Content-Type: application/x-cisco-remotecc-request+xml

Referred-By: <sip:192.168.0.79>

Content-Length: 292

<?xml version="1.0" encoding="UTF-8"?><x-cisco-remotecc-request><statuslineupdatereq><action>notify_display</action><statustext>Max Phones Exceeded</statustext><displaytimeout>10</displaytimeout><linenumber>0</linenumber><priority>1</priority></statuslineupdatereq></x-cisco-remotecc-request>

000232: Sep 23 18:00:36.791: //49/E232B6C88021/SIP/Msg/ccsipDisplayMsg:

Sent:

SIP/2.0 500 Internal Server Error

Via: SIP/2.0/UDP 192.168.0.22:5060;branch=z9hG4bK29b5ed11d73d42d113320c018fa2b75;rport

From: "148" <sip:148@192.168.0.79>;tag=971336543

To: "148" <sip:148@192.168.0.79>;tag=2D7678-22D

Date: Mon, 23 Sep 2013 18:00:36 GMT

Call-ID: 1651868960@192_168_0_22

Server: Cisco-SIPGateway/IOS-12.x

CSeq: 2 REGISTER

Content-Length: 0

000233: Sep 23 18:00:36.811: //0/000000000000/SIP/Msg/ccsipDisplayMsg:

Received:

SIP/2.0 420 Bad Extension

Via: SIP/2.0/UDP 192.168.0.79:5060;branch=z9hG4bKEAA9

From: <sip:192.168.0.79>;tag=2D76A0-2113

To: <sip:148@192.168.0.22>

Call-ID: E238D0F0-23B011E3-8022ADAE-F94440D4@192.168.0.79

CSeq: 101 REFER

Unsupported: norefersub

Content-Length: 0

Would appreciate some assistance to get these DECT handsets to register if you can please.

Many thanks

5 REPLIES

Re: 3rd party SIP device (gigaset) registration to CME fails

Hi.
Can you try to remove "type ATA" from register pool 3?

HTH
Regards
Carlo

Sent from Cisco Technical Support iPhone App

Please rate all helpful posts "The more you help the more you learn"
New Member

Re: 3rd party SIP device (gigaset) registration to CME fails

Hi Carlo,

I removed the type ata, recreated profiles, reset the gigaset and still get the same errors :-

000102: Sep 23 19:33:51.807: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
REGISTER sip:192.168.0.79 SIP/2.0
Via: SIP/2.0/UDP 192.168.0.22:5060;branch=z9hG4bK8a80a321ff44a7b29b99942e75800145;rport
From: "148" <148>;tag=1684057756
To: "148" <148>
Call-ID: 3752067865@192_168_0_22
CSeq: 1 REGISTER
Contact: <148>
Max-Forwards: 70
User-Agent: N720-DM-PRO/70.040.00.000.000
Expires: 60
Allow: INVITE, ACK, CANCEL, BYE, OPTIONS, INFO, REFER, SUBSCRIBE, NOTIFY
Content-Length: 0


000103: Sep 23 19:33:51.811: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_reg_search_call_id_table: No entry found in sipCallID Table
000104: Sep 23 19:33:51.811: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_validate_own_ip_addr: ReqLine IP addr does not match with host IP addr
000105: Sep 23 19:33:51.811: //25/E91E515B8012/SIP/Error/ccsip_spi_register_incoming_registration: Registration Authorization failed with authorization header=
000106: Sep 23 19:33:51.811: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_ipip_PassthruContentContainerFreeHelper: Null ContentQ - Exit
000107: Sep 23 19:33:51.815: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 192.168.0.22:5060;branch=z9hG4bK8a80a321ff44a7b29b99942e75800145;rport
From: "148" <148>;tag=1684057756
To: "148" <148>
Date: Mon, 23 Sep 2013 19:33:51 GMT
Call-ID: 3752067865@192_168_0_22
Server: Cisco-SIPGateway/IOS-12.x
CSeq: 1 REGISTER
Content-Length: 0


000108: Sep 23 19:33:51.815: //25/E91E515B8012/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 192.168.0.22:5060;branch=z9hG4bK8a80a321ff44a7b29b99942e75800145;rport
From: "148" <148>;tag=1684057756
To: "148" <148>;tag=4A9BB0-267E
Date: Mon, 23 Sep 2013 19:33:51 GMT
Call-ID: 3752067865@192_168_0_22
Server: Cisco-SIPGateway/IOS-12.x
CSeq: 1 REGISTER
WWW-Authenticate: Digest realm="all",nonce="085726D5000775F8",algorithm=MD5,qop="auth"
Content-Length: 0


000109: Sep 23 19:33:51.839: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
REGISTER sip:192.168.0.79 SIP/2.0
Via: SIP/2.0/UDP 192.168.0.22:5060;branch=z9hG4bKef933dc052dd58816154baef924488af;rport
From: "148" <148>;tag=1684057756
To: "148" <148>
Call-ID: 3752067865@192_168_0_22
CSeq: 2 REGISTER
Contact: <148>
Authorization: Digest username="148", realm="all", qop=auth, algorithm=MD5, uri="sip:192.168.0.79", nonce="085726D5000775F8", nc=00000001, cnonce="d73b0e5cb55083abf1e6c04d57978c0d", response="f2b53d227a972ecc5048883a02e7d604"
Max-Forwards: 70
User-Agent: N720-DM-PRO/70.040.00.000.000
Expires: 60
Allow: INVITE, ACK, CANCEL, BYE, OPTIONS, INFO, REFER, SUBSCRIBE, NOTIFY
Content-Length: 0


000110: Sep 23 19:33:51.843: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_reg_search_call_id_table: No entry found in sipCallID Table
000111: Sep 23 19:33:51.843: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_validate_own_ip_addr: ReqLine IP addr does not match with host IP addr
000112: Sep 23 19:33:51.851: //25/E91E515B8012/SIP/Error/ccsip_spi_register_incoming_registration: Error during REGISTER for contact - 192.168.0.22 148
000113: Sep 23 19:33:51.851: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_ipip_PassthruContentContainerFreeHelper: Null ContentQ - Exit
000114: Sep 23 19:33:51.851: //25/E91E515B8012/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 192.168.0.22:5060;branch=z9hG4bKef933dc052dd58816154baef924488af;rport
From: "148" <148>;tag=1684057756
To: "148" <148>;tag=4A9BB0-267E
Date: Mon, 23 Sep 2013 19:33:51 GMT
Call-ID: 3752067865@192_168_0_22
Server: Cisco-SIPGateway/IOS-12.x
CSeq: 2 REGISTER
Content-Length: 0


000115: Sep 23 19:33:51.851: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
REFER sip:148@192.168.0.22:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.0.79:5060;branch=z9hG4bK8717
From: <192.168.0.79>;tag=4A9BD8-1FD2
To: <148>
Call-ID: E9246B84-23BD11E3-8013B5F2-6196802@192.168.0.79
CSeq: 101 REFER
Max-Forwards: 70
Contact: <192.168.0.79:5060>
User-Agent: Cisco-SIPGateway/IOS-12.x
Timestamp: 1379964831
Require: norefersub
Refer-To: cid:0488955
Content-ID: <0488955>
Content-Type: application/x-cisco-remotecc-request+xml
Referred-By: <192.168.0.79>
Content-Length: 292

notify_displayMax Phones Exceeded1001
000116: Sep 23 19:33:51.855: //25/E91E515B8012/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 500 Internal Server Error
Via: SIP/2.0/UDP 192.168.0.22:5060;branch=z9hG4bKef933dc052dd58816154baef924488af;rport
From: "148" <148>;tag=1684057756
To: "148" <148>;tag=4A9BB0-267E
Date: Mon, 23 Sep 2013 19:33:51 GMT
Call-ID: 3752067865@192_168_0_22
Server: Cisco-SIPGateway/IOS-12.x
CSeq: 2 REGISTER
Content-Length: 0


000117: Sep 23 19:33:51.875: //0/000000000000/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 420 Bad Extension
Via: SIP/2.0/UDP 192.168.0.79:5060;branch=z9hG4bK8717
From: <192.168.0.79>;tag=4A9BD8-1FD2
To: <148>
Call-ID: E9246B84-23BD11E3-8013B5F2-6196802@192.168.0.79
CSeq: 101 REFER
Unsupported: norefersub
Content-Length: 0

Best wishes,

Paul

Re: 3rd party SIP device (gigaset) registration to CME fails

Hi Paul.
Can you please also post a screenshot of gigaset configuration

Thanks
Carlo

Sent from Cisco Technical Support iPhone App

Please rate all helpful posts "The more you help the more you learn"
New Member

Re: 3rd party SIP device (gigaset) registration to CME fails

No problem Carlo.

Thanks for looking.

I'm uploading a sh run, and three screenshots from the Gigaset, one of the VoIP provider where we configure the CME details & a couple of pages for the actual handsets.

3rd party SIP device (gigaset) registration to CME fails

Hi Paul.

Thank you for attaching those info.

Have you tryed to upgrade to the latest IOS the CME?

Let me know

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
932
Views
0
Helpful
5
Replies
CreatePlease login to create content