Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

4 Digit to 10 Digit Dialing - W/O Using Speed Dials

Hi Guys,

I'm trying to get my CME 7.0 system users to dial a non DN 4 digit extension and have that translated to a 7-10 digit extension. Like a customer wants to dial one of their employees that works via cell phone. They want to dial a 4 digit number and have that transfered to their 7-10 digit outside extension. This could be done via a translation pattern in CUCM but not sure how to do it in CUCME. Would a dial-peer work or number translations? If so how would they be configured?

Thank You!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 4 Digit to 10 Digit Dialing - W/O Using Speed Dials

One way to do this is with the "num-exp" command. So if you want to dial 1234 and translate it to 91234567, you could configure "num-exp 1234 91234567". It could also be done with a voice translation rule.

Hope this helps. If so, please rate the post.

Brandon

2 REPLIES

Re: 4 Digit to 10 Digit Dialing - W/O Using Speed Dials

One way to do this is with the "num-exp" command. So if you want to dial 1234 and translate it to 91234567, you could configure "num-exp 1234 91234567". It could also be done with a voice translation rule.

Hope this helps. If so, please rate the post.

Brandon

New Member

Re: 4 Digit to 10 Digit Dialing - W/O Using Speed Dials

num-exp was perfect, thx!

127
Views
0
Helpful
2
Replies
CreatePlease to create content