02-24-2010 11:03 AM - edited 03-15-2019 09:31 PM
Hi All,
I am trying to configure 525G with CME version 7.1. I tried both SCCP and SIP, and it's not being register to CME. Is 525G supported by CME though?
thanks
Alex
Solved! Go to Solution.
02-25-2010 06:54 AM
Hi Alex,
The 500 series IP Phones are only supported with the
Small Business UC500 (520,540,560). They are not
supported on CME.
This section below does not mention the 525G (As it is an older doc) but the restrictions do carry across;
The Cisco Unified IP Phones 521G, 524G, 521SG, and 524SG address the communication needs of any Cisco Smart Business Communications System (SBCS) implementation. These phones are designed to work ***solely with the Cisco Unified Communications 500 Series for Small Business.
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps9730/qanda_c67-466070.html
Cisco Unified CME 7.1 Supported Firmware, Platforms, Memory, and Voice Products
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme71spc.htm
Hope this helps!
Rob
02-25-2010 06:54 AM
Hi Alex,
The 500 series IP Phones are only supported with the
Small Business UC500 (520,540,560). They are not
supported on CME.
This section below does not mention the 525G (As it is an older doc) but the restrictions do carry across;
The Cisco Unified IP Phones 521G, 524G, 521SG, and 524SG address the communication needs of any Cisco Smart Business Communications System (SBCS) implementation. These phones are designed to work ***solely with the Cisco Unified Communications 500 Series for Small Business.
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps9730/qanda_c67-466070.html
Cisco Unified CME 7.1 Supported Firmware, Platforms, Memory, and Voice Products
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme71spc.htm
Hope this helps!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: