Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

5350 PRI Outbound Works / No Inbound

Hi all,

I have a 5350 with a voice TI PRI connected to it. I can make outgoing calls (Sip -> 5350 -> PRI) perfectly fine. When I dial on of my DIDs (PRI -> 5350) the 5350 is answering and giving dialtone to the user. When I remove the dial-peer voice 1000 from the config the inbound caller hears a data modem/fax machine.

How to I troubleshoot/resolve this?

Thanks,

Max

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: 5350 PRI Outbound Works / No Inbound

Hi,

you need one dial-peer pots having direct-inward-dial, matching the called number

So for example, if telco is sending you four digits, always starting with 3

dial-peer voice 10 pots

incoming called-number 3...

direct-inward-dial

If telco send the full number, replace 3 with your partial number an use dots where the DID digits are.

When there is no match, the call will land on a modem.

Hope this helps, please rate all useful posts!

3 REPLIES
Hall of Fame Super Gold

Re: 5350 PRI Outbound Works / No Inbound

Hi,

you need one dial-peer pots having direct-inward-dial, matching the called number

So for example, if telco is sending you four digits, always starting with 3

dial-peer voice 10 pots

incoming called-number 3...

direct-inward-dial

If telco send the full number, replace 3 with your partial number an use dots where the DID digits are.

When there is no match, the call will land on a modem.

Hope this helps, please rate all useful posts!

New Member

Re: 5350 PRI Outbound Works / No Inbound

This was exactly what I needed. Thank you very much.

Hall of Fame Super Gold

Re: 5350 PRI Outbound Works / No Inbound

Ah, now that was quick.

Thank you for the nice rating!

107
Views
5
Helpful
3
Replies