5350 Sample Translation Rule

[maxclark]

Hi all,

The carrier is sending us 3 digits which will start with a 7, I need to change this so the pattern reaching the PBX starts with a 1. I have been looking at the translation rules and am assuming that there is something extremely easy that I can do for this.

Thanks,

Max

[paolo bevilacqua · Accepted solution]

For the practical side:

dial-peer voice 10 pots

incoming called-number 7..

direct-inward-dial

translation-profile incoming 7to1

voice translation-profile 7to1

translate called 100

voice translation-rule 100

rule 1 /^7/ /1/

For the educational side of all that:

http://cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml

good luck!