I just upgraded from 4.2.3 to 6.1.1. The upgrade went fine. After looking in RTMT I noticed that my replication was broken on two of my subs. I'm getting 4's on my replication status on these subs. I have run a couple of the utils dbreplication commands from the CLI and they have not helped. I ran a repair and a reset. If anybody has some good docs on the replication for 6.X or can offer any help I would appreciate it. Thanks
I do not know if it is in 6.1.1, but in 6.1.2 I was facing a similar problem that is a known bug (don't have the bug number). But stopping and starting the Call Manager service resolved the problem. It is supposed to be fixed in ES 6.1(2.1101.2).
The way we came across it was CFWDALL did not work when using CCMAdmin or CCMUser for external calls.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...