Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

6.1(2) to 7.1(3)B Upgrade

Hi,

I am looking for clarification on upgrading from 6.1.2.1000-13 to 7.1(3)B.

I ordered the upgrade disks and have a disk to upgrade from 6.X to 7.1(3)B.

7.1(3)B release notes indicate that an upgrade is not possible from 6.1.2 but from 6.1.3 or higher.

I believe that I must upgrade to 7.1(2) as an interim step before upgrade to 7.1(3)B. Is this correct?

thanks

Ian.

Message was edited by: iwearing

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: 6.1(2) to 7.1(3)B Upgrade

Hi Ian,

You really have two choices here

You can upgrade to a 6.1(3) version as a first step or 7.1(2) as

you correctly noted. Either way would be supported.

Cisco Unified Communications Manager Software Compatibility Matrix

Table 5 Supported Cisco Unified Communications Manager Upgrades for Release 7.1(x)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp108792

Tons of great info!

Take care,
Rob

2 REPLIES
Hall of Fame Super Red

Re: 6.1(2) to 7.1(3)B Upgrade

Hi Ian,

You really have two choices here

You can upgrade to a 6.1(3) version as a first step or 7.1(2) as

you correctly noted. Either way would be supported.

Cisco Unified Communications Manager Software Compatibility Matrix

Table 5 Supported Cisco Unified Communications Manager Upgrades for Release 7.1(x)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp108792

Tons of great info!

Take care,
Rob

New Member

Re: 6.1(2) to 7.1(3)B Upgrade

Rob,

Thanks for the clarification.

I have a set of 7.0(2a) disks which I can use as an interim step from 6.1(2) to 7.1(3b)

thanks

Ian.

237
Views
0
Helpful
2
Replies