Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

6.x/7.x Upgrade Paths from 5.1(3)

I'm finding some conflicting upgrade information in the release notes of 5.1(3):

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/5_1_3/513cmrn_2.html#wp188112

6.1(1b):

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_1/cucm-rel_note-611b.html#wp321829

6.1(2):

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_2/cucm-rel_note-612.html#wp396072

and 7.0(1):

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/7_0_1/cucm-rel_notes-701.html#wp579989

The 5.1(3) doc specifically states:

Do Not Upgrade from Cisco Unified CallManager 5.1(3) to Cisco Unified Communications Manager 6.x

It is not possible to successfully upgrade from Cisco Unified CallManager Release 5.1(3) to Cisco Unified Communications Manager Release 6.x.

Whereas the other 6.x and 7.x docs listed above all list 5.1(3) under the allowed direct upgrades.

Is it safe to ignore the warning in the 5.1(3) doc??

thanks,

Will

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: 6.x/7.x Upgrade Paths from 5.1(3)

Hi Will here is the link for the upgrade path

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008086cc7c.shtml

It stays that you can upgrade from 5.1.3 to 6.1

If you upgrade to CUCM Release 5.1(3), you cannot then upgrade to Releases 6.0(1) or 6.0(1a).

Pls rate if it helped

HTH

2 REPLIES
New Member

Re: 6.x/7.x Upgrade Paths from 5.1(3)

Hi Will here is the link for the upgrade path

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008086cc7c.shtml

It stays that you can upgrade from 5.1.3 to 6.1

If you upgrade to CUCM Release 5.1(3), you cannot then upgrade to Releases 6.0(1) or 6.0(1a).

Pls rate if it helped

HTH

Silver

Re: 6.x/7.x Upgrade Paths from 5.1(3)

Ahhhh... So the note in the 5.1(3) release notes specified that an upgrade to 5.1(3) could not upgrade to 6.x. Makes perfect sense. Thanks!

131
Views
0
Helpful
2
Replies