Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

7814I2 CUCM server with 6.1 need to Install new cucm 7.1

We have customer have existing setup with 7814I2 it is with CUCm 6.1, he need to install in the same serve 7.1 as fresh installation, please let me know 7814I2 will support CUCM 7.1.


Please light me on this CUCM 7.1 fresh installation.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 7814I2 CUCM server with 6.1 need to Install new cucm 7.1

Open the link:

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html

Use Ctrl-F in your browser to search.

Type in the search term: 7815-I2

And you will jump to a section that looks like this:

You will find that the platform is supported but with a footnote.  That footnote says:

(2) Supported, but note that Cisco Unified  Communications Manager 5.0 and later require minimum memory and disk  size as described below. Use http://www.cisco.com/go/swonly to get supported memory and disk part numbers.

So, then you have to go and check out your memory and hard disks to see if they are compliant.  Which, since you are running 6.x already I suspect they are.

HTH.

Regards,
Bill

Please remember to rate helpful posts.

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

8 REPLIES
Hall of Fame Super Red

Re: 7814I2 CUCM server with 6.1 need to Install new cucm 7.1

Hi Bala,

I'm not familiar with the 7814-I2 so check that model #

This is the "master" list for Server support in CUCM;

Supported Cisco Unified Communications Manager  Releases by Server

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html

If you want to do a "fresh" CUCM 7.1 install you would need to order the 7.1 media (DVD's)

Hope this  helps!

Rob

Re: 7814I2 CUCM server with 6.1 need to Install new cucm 7.1

Rob,

Seriously, have you started working on your typing skills?  Or am I just slowing down ;-)

Regards,
Bill

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

Re: 7814I2 CUCM server with 6.1 need to Install new cucm 7.1

I have never heard of a 7814 I2, but you may want to check this link:

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html

HTH.


Regards,
Bill

Please remember to rate helpful posts.

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

Hall of Fame Super Red

Re: 7814I2 CUCM server with 6.1 need to Install new cucm 7.1

Hey Bill,

No man! It took me 35 minutes

+5 points for this my friend and for the exceptional answer to the

Global MWI post (WOW!!)

Cheers!

Huff

Re: 7814I2 CUCM server with 6.1 need to Install new cucm 7.1

The server model is 7815I2, working with CUCM 6.1 version. They need fresh installation of 7.1 in the server 7815I2, please let me know it will support or not ?

Re: 7814I2 CUCM server with 6.1 need to Install new cucm 7.1

Open the link:

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html

Use Ctrl-F in your browser to search.

Type in the search term: 7815-I2

And you will jump to a section that looks like this:

You will find that the platform is supported but with a footnote.  That footnote says:

(2) Supported, but note that Cisco Unified  Communications Manager 5.0 and later require minimum memory and disk  size as described below. Use http://www.cisco.com/go/swonly to get supported memory and disk part numbers.

So, then you have to go and check out your memory and hard disks to see if they are compliant.  Which, since you are running 6.x already I suspect they are.

HTH.

Regards,
Bill

Please remember to rate helpful posts.

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

Re: 7814I2 CUCM server with 6.1 need to Install new cucm 7.1

From the table it looks  7915I2 supports 7.1 installation, to format the version 6.1 just we need to boot the server with DVD Drive and format the HDD and to Install as fresh CUCM 7.1 or please confirm this right procedure to start the installation.

Re: 7814I2 CUCM server with 6.1 need to Install new cucm 7.1

That depends.  Did you want to keep the data or did you want to build the system as a new system, with new data.  If you want to keep the data, then you will need to initiate a software upgrade process and use the DVD as the software source.  If you want to rebuild from scratch, just boot from the DVD.  It will detect a previous version and you can choose to replace the older version.

HTH.

Regards,
Bill

Please remember to rate helpful posts.

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

196
Views
10
Helpful
8
Replies