Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

7905 pass to SIP

Hi, I need to pass from SCCP to SIP a C7905 IP phone, but I don't know very well how to do it. Can anybody help me?

Actual skinny firmware is 1.02.00(031023A)



Re: 7905 pass to SIP

To convert an IP phone from Skinny (SCCP) protocol to Session Initiation Protocol (SIP) with Cisco CallManager running 5.0.x, perform this procedure:

On the Cisco CallManager Admin page, go to Bulk Administration > Phones > Migrate Phones > SCCP to SIP.

On this screen, enter a query in order to select the device(s) to upgrade.

On the next screen, select a Phone Profile. Add one if one is not already present.

To add a Phone Profile, perform these steps:

Go to Bulk Administration > Phones > Phone Templates.

When the migrate job is submitted, go to Bulk Administration > Job Scheduler.

Note: Sometimes, the job must be activated. If the job remains in Pending state, activate the Bulk Provisioning Service under Serviceability > Service Activation.

Go to System > Enterprise Parameters and change the Auto Registration Phone Protocol option to SIP.

Restart the Cisco CallManager service.

New Member

Re: 7905 pass to SIP

Is there any procedure to do this manually? not using call manager.