Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

7905 sccp 6.0 does not support srst?

Hi,

I'm trying to test srst feature. I have one 7905 and one 7960 in branch office, and one ccm4.1(3) in central office, I enabled srst feature in branch router. then I use access-list to deny all port 2000 packet going to ccm, after a while, 7960 switch register to the branch router successfully, but 7905 just stop working. I checked 7905's setting and found it has only one Callmanager setting, but 7960 has two: one is for the central ccm and another one is for SRST which specified to the branch router. That's why 7960 succeeded and 7905 failed.

but, in my ccm, 7960 and 7905 are using same device pool which enabled srst feature, why can not 7905 get the srst information from ccm?

my 7905 is using sccp version 6.00.00, my 7960 is using sccp 7.1(2.0).

thanks for any responses.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: 7905 sccp 6.0 does not support srst?

you can check which firmwares are compatible depending on your SRST version:

Cisco Unified Survivable Remote Site Telephony (SRST): All Versions

http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/roadmap/srstph.htm

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
1 REPLY
Cisco Employee

Re: 7905 sccp 6.0 does not support srst?

you can check which firmwares are compatible depending on your SRST version:

Cisco Unified Survivable Remote Site Telephony (SRST): All Versions

http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/roadmap/srstph.htm

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
111
Views
0
Helpful
1
Replies