7906 phone with CME 4.1 -Login soft key not displayed-
I have CME 4.1 c3845-adventerprisek9-mz.124-15.T6.bin.
I have already enable the option call blocking, all the files necessary for the phones are loaded in CF including localization files. I have also tried with template for the phones but the "Login" soft key is not shown.
the 7906 phones are new.
what else could I check in order to get the softkey "Login" displayed?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...