Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7906G and 7911G phones not recognised on CCM 4.1.3

Hi

I am having a problem in that when I go to add a 7906G or 7911G phone on CCM 4.1.3, the phone type is not listed. Do I need to upgrade my CCM in order to get it to support these phones or can I download a device pack to support these phones on CCM 413?

Any help appreciated?

Thanks,

Derek

4 REPLIES

Re: 7906G and 7911G phones not recognised on CCM 4.1.3

New Member

Re: 7906G and 7911G phones not recognised on CCM 4.1.3

Can I use 4.1.78 on CCM 4.1.3?

Can I go form my current device pack straight to 4.1.78

Thanks,

Derek

Re: 7906G and 7911G phones not recognised on CCM 4.1.3

Yes you can.

If that helped, please rate.

Cisco Employee

Re: 7906G and 7911G phones not recognised on CCM 4.1.3

Supported CallManager Versions

This Cisco Unified IP Phone 7906G and 7911G firmware release is supported with the following Cisco Unified CallManager versions. If you are running Cisco Unified CallManager release 3.0, 3.1, or 3.2, you must upgrade to Cisco Unified CallManager release 3.3(5) or later before you install this firmware release.

•Cisco Unified CallManager version 3.3(5) SR1 or later

•Cisco Unified CallManager version 4.0(2a) SR2b or later

•Cisco Unified CallManager version 4.1(3) SR1 or later

also you need:

ciscocm.4-1-DevPack-25.3.exe, or later

Cisco Unified IP Phone 7906G and 7911G Release Notes for Firmware Release 7.2(3) for Cisco Unified CallManager 4.1

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7906g_7911g/firmware/7_2_3/english/release/notes/11R723sc.html

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
113
Views
0
Helpful
4
Replies