Thank you for your input. I have provided the customer with the latest devpack.
I will also take the oportunity to ask you another question regarding another update: I have another customer running CCM v4.1(3)es117. They have purchased a new 7937 conference phone and they need support for it. Is there any way to add support for just this device without installing a devpack?
You can always install the latest DevPack disregarding the level you're at.
You can go thru the release notes from the ES or from the SR and it should tell you the DevPack that is going to be installed, in some cases like an ES there would not be a DevPack upgrade but usually the SRs contains DevPack updates but also usually not the latest one available.
Our recommendation is to always apply the latest SR in the systems but on my personal opinion if the system is working fine and there is no real need you can leave it that way. In some cases the patches are needed to support new features or to fix bugs but if a system works fine i usually do not patch it.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...