probably this is a case for an RMA but if anybody has a secret key combination to do more than a factory reset I'd be happy to read that.
My phone lights the LEDs, then shows the Cisco Systems, Inc. Screen but then reboots. I can factory reset it (1234....), it is able to download the actual software from CME4.1 (I can see that with debug tftp events) but in the end it is not able to boot completely and continues to try booting over and over again.
As the sequence of activities during booting is not described anywhere I do not really know where it gets stuck. If anyone has some info or an idea I'd be happy to read it.
try to unzip the SCCP11.8-2-2SR1S in a tftp server on your laptop/pc and assign option 150 to your DHCP server with th ip address of this tftp server (or statically on ur 7906) and see tftp logs in ur tftp program.
i tried this previosly with sccp and sip and it worked fine.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...