Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

7911 ip phone hang while load file upgrade

While new installation 7911 ip phone are getting hang in the process of load file upgrade from SCCP11.8-3-2S to SCCP11.8-4-1SR2S due less bandwidth between CCM & IP phone. In hang ip phone its key and display does not work even after rebooting. Even factory reset keys does not work. Is there any way to make these hang ip phone work again.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: 7911 ip phone hang while load file upgrade

If you search the forum, it has been discussed many times.

Of course you have to unzip the files as mentioned before.

6 REPLIES
Hall of Fame Super Gold

Re: 7911 ip phone hang while load file upgrade

Yes, use tftpd32, set dhcp option 150 to be PC address, and you should be able to load all files.

New Member

Re: 7911 ip phone hang while load file upgrade

Hi

plz tell mw what all file I need to keep in tftp server root directory. Is any cahnge in file name is required.

Thanks,

Abhas Jain

Hall of Fame Super Gold

Re: 7911 ip phone hang while load file upgrade

All the files found in the .ZIP distribution.

New Member

Re: 7911 ip phone hang while load file upgrade

Hi,

Is there any document available for this?

Do I need to unzip & then put file in tftp?

Regards,

Abhas Jain

Hall of Fame Super Gold

Re: 7911 ip phone hang while load file upgrade

If you search the forum, it has been discussed many times.

Of course you have to unzip the files as mentioned before.

New Member

Re: 7911 ip phone hang while load file upgrade

Hi abhas,

Please tell me how to do the same.

I'm also facing the same issue.

Good day...

697
Views
0
Helpful
6
Replies