cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2797
Views
20
Helpful
9
Replies

7912G firmware upgrade from SIP to SCCP

lincun-qian
Level 1
Level 1

Want to change firmware type for my 7912G. It is based on SIP image CP7912010301SIP050608A

Version 1.3.1(050608A)

Can I convert it to SCCP CP7912080004SCCP080108A.sbin which is the latest version?

Many thanks. I've spent more than 4 hours reading and testing p.bevilacqua advice, but no luck.

I tried to use a laptop as a tftp server and use a layer3 switch as tftp server. Here is the tftp debug from the layer3 switch:

Jul 14 18:06:43.705 AEST: TFTP: read request from host 172.22.1.91(16262) via Vlan250

Jul 14 18:06:43.705 AEST: TFTP: Opened flash:gk00141c48d472, fd 0, size 45

Jul 14 18:06:43.705 AEST: TFTP: Sending block 1 (retry 0), socket_id 0x1D01490

Jul 14 18:06:43.730 AEST: TFTP: Received ACK for block 1, socket_id 0x1D01490

Jul 14 18:06:43.730 AEST: TFTP: Finished flash:gk00141c48d472, time 00:00:00

ADG-DCN-3560-1#

Jul 14 18:07:00.901 AEST: TFTP: Server request for port 16264, socket_id 0x1CFE900

Jul 14 18:07:00.901 AEST: TFTP: read request from host 172.22.1.91(16264) via Vlan250

Jul 14 18:07:00.901 AEST: TFTP: Opened flash:gk00141c48d472, fd 0, size 45

Jul 14 18:07:00.901 AEST: TFTP: Sending block 1 (retry 0), socket_id 0x1CFE900

Jul 14 18:07:00.918 AEST: TFTP: Received ACK for block 1, socket_id 0x1CFE900

Jul 14 18:07:00.918 AEST: TFTP: Finished flash:gk00141c48d472, time 00:00:0

Thanks in advance.

9 Replies 9

paolo bevilacqua
Hall of Fame
Hall of Fame

Hi,

your "gk" file must be wrong, how do you generated it ?

I read a lot useful information you've given.

1. download bmp2logo.zip from cisco web site

2. create txt file gk00141c48d472.txt:

{

#txt

upgradecode:3,0x601,0x0400,0x0100,192.172.22.1.90,69,0x080108A,CP7912080004SCCP080108A.sbin

192.172.22.1.90 is the ip address of the tftp server

}

3. C:\000>dir

14/07/2008 05:16 PM

.

14/07/2008 05:16 PM

..

09/05/2002 10:43 AM 62,976 cfgfmt.exe

14/07/2008 06:02 PM 45 gk00141c48d472

14/07/2008 10:30 PM 97 gk00141c48d472.txt

17/05/2002 05:21 PM 3,022 ptag.dat

4 File(s) 66,140 bytes

2 Dir(s) 7,112,564,736 bytes free

C:\000>cfgfmt gk00141c48d472.txt gk00141c48d472

C:\000>

4. copy file gk00141c48d472 and

CP7912080004SCCP080108A.sbin to the tftp server.

5. power reset IP Phone 7912

Hi, your tftp address has 5 bytes !?!

I saw that. I have to wait another 48 hours to test that as I do not have PoE switch with me at the moment. Appreciate it.

I will update here after testing.

One more thing, when I tried this ont the 7912G, it looks nothing happened:

try the reset sequence: power off, press and hold #, power on, wait for led to flash in pattern, release #, press in sequence 123456789*0#.

Hi mate, the 7902/05/12 do not support any keypad reset sequence.

Thanks for the appreciation and good luck!

I bought the 7912G from ebay and it comes with SIP image. I would not buy it if I knew that. Should have asked the seller before click the button!!!

When I tried to disable the DHCP on 7912G, it ask me to input the password, is there anyway to reset the password?

No worries, just use a little bit of patience and the phone will do what you want.

The password is set via config file. Perhaps try something like 0000 or 1234.

Thanks a lot. I still do not have access to a PoE switch. I will update result here after the test.

The password is 1234. After fix the ip address, everything is working now. Thanks again.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: