Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

7921G on UC540W

We have a problem getting a 7921G connected to a UC540W...

The relevant phone loads are present in the UC540, but it isn't actually getting that far.

As far as we can tell, the 7921 isn't able to connect to the wireless, which is obviously fundamental.

Is there something obvious I am missing? The system is otherwise up and running perfectly, but this is the first wireless phone added.

Steps taken and config shown below...

We have 7921 in World mode. We have enable world mode on the UC540W

Other devices like iPhones and PC's can see the two wireless networks that are the voice and data VLANs

The 7921G cannot see these Wireless networks even after we turn on SSID broadcast for the Voice VLAN

After entering the data manually it alternates between Locating network services and Authentication failed.

The network is OPEN

Site survey returns nothing

App Load ID

CP7921G-MFG-A.7.LOADS

Bootload ID

BL-P203-6065E201

WLAN Driver ID

5.0.0.96

WLAN Firmware ID

4.1.0.89

1 REPLY
New Member

7921G on UC540W

Panic over.

A reboot of the UC540W solved the issue.

210
Views
0
Helpful
1
Replies
CreatePlease to create content