10-09-2012 06:52 AM - edited 03-16-2019 01:35 PM
Hi ,
Is 7925g Support cisco 1841 CME router ... i found type only 7920 and 7921 in the router.
any help will be higly appreciated
10-09-2012 06:57 AM
What is the CME Version that you are using?
Regards
Leonardo Santana
10-09-2012 07:19 AM
Hi , How can verify the CME version .. actually i got router and its mentioned there C1861-SRST-C-F/K9
10-09-2012 07:23 AM
With the following command:
sh telephony-service
CONFIG (Version=7.1)
=====================
Version 7.1
Cisco Unified Communications Manager Express
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html
Regards
Leonardo Santana
Rate this if helps!
10-09-2012 07:26 AM
Other thing take a look on the datasheet of 7925g
Look too at the CME compatibility Matrix according to your version:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_device_support_tables_list.html
Rate this if helps!
Regards
Leonardo Santana
10-09-2012 07:29 AM
Router#sh telephony-service
CONFIG (Version=4.2(0))
=====================
Version 4.2(0)
Cisco Unified Communications Manager Express
For on-line documentation please see:
www.cisco.com/univercd/cc/td/doc/product/ac
source-address 0.0.0.0 port 2000
max-ephones 12
max-dn 24
max-conferences 4 gain -6
dspfarm units 0
dspfarm transcode sessions 0
conference software
hunt-group report delay 1 hours
hunt-group logout DND
max-redirect 5
cnf-file location: system:
cnf-file option: PER-PHONE-TYPE
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
Router#sh telephony-service
CONFIG (Version=4.2(0))
=====================
Version 4.2(0)
Cisco Unified Communications Manager Express
For on-line documentation please see:
www.cisco.com/univercd/cc/td/doc/product/ac source-address 0.0.0.0 port 2000
max-ephones 12
max-dn 24
max-conferences 4 gain -6
dspfarm units 0
dspfarm transcode sessions 0
conference software
hunt-group report delay 1 hours
hunt-group logout DND
max-redirect 5
cnf-file location: system:
cnf-file option: PER-PHONE-TYPE
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
10-09-2012 07:31 AM
Hi , The CME 4.0 .. that means it no t supported with this version ??? ho we can overcome this issue ??
10-09-2012 07:36 AM
Hello Shaikh
No its not support with your CME Version:
Router#sh telephony-service
CONFIG (Version=4.2(0))
=====================
Version 4.2(0)
Cisco Unified Communications Manager Express
The 7925g is supported since CME Version 4.3 and Later:
Regards
Leonardo Santana
10-09-2012 07:43 AM
Hi ,
Can i upgrade CME 4.02 to later ... free of cost ?? thankyou in advance
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide