Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7931 Features

Hi there !

I read 7931 have 24 buttons..

Are those buttons for monitoring only or is it possible to make them a speed dial button as well ?

Can they be both monitoring and SpeedDial in the same time ?

I did not find the Smartnet PN , witch one should I use ?

Thanks.

Andrei.

1 REPLY
Hall of Fame Super Red

Re: 7931 Features

Hi Andrei,

Just as a "heads up" the 7931 is only supported on CME and CCM 6.x (I know last time we spoke you were running CCM 4.2 :)

If you are using the 7931 with CME then the Buttons can be programmed in Monitor Mode which is also a DSS/Speeddial to the Monitored DN.

The Part#'s are shown in this doc;

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/ps7062/product_data_sheet0900aecd80534259.html

Hope this helps!

Rob

136
Views
0
Helpful
1
Replies
CreatePlease login to create content