Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

7936 conferencce phone doesnt register on CCM5.0

I am having issues in registaering a 7936 IP Phone on a CCM5.0. Is 7936 supported on CCM5.0?

4 REPLIES
Hall of Fame Super Red

Re: 7936 conferencce phone doesnt register on CCM5.0

Hi Peter,

The 7936 is supported on CCM 5.0. What happens when it trys to boot up?

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7936/firmware/3_3_15/english/release/notes/7936_3315.html

If you are trying this on a normal "voice" switchport it may not work. They don't seem to like the

access vlan

voice vlan

Just set;

switchport mode access

switchport access vlan xxx (where xxx is the voice vlan)

Let us know,

Rob

New Member

Re: 7936 conferencce phone doesnt register on CCM5.0

Hi Rob,

I've been able to register the 7936 phone. But when I make an external call, there's a two-way commuinication, which is ok, but when an external call comes in, I can't hear the calling party but he hears me well (one way communication). Attached is the sh run. Pls help.

Hall of Fame Super Red

Re: 7936 conferencce phone doesnt register on CCM5.0

Hi Peter,

Well, we are getting there :) I don't have much experience troubleshooting this type of issue. I have read about the "bind command" as shown in this doc;

Troubleshooting One Way Voice Issues

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a008009484b.shtml

Hope this helps!

Rob

New Member

Re: 7936 conferencce phone doesnt register on CCM5.0

HI Rob,

The document seem to be complex as it does not give one particular solution to the "oe-way communication issue". I dont seem to get the right solution. ALl the same, I'll still try more.

134
Views
4
Helpful
4
Replies
CreatePlease to create content