Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7936 IP Conference Station IP load 3-3-16

I have five 7936 that take about 15 -20 minutes to load everytime they are unplugged from the network.  I have a 2 server CUCM cluster on train 6.1.3.  My switch config for the ports are as follow.  Any idea why so long for the boot up?  Should I try load update 3-3-20?

switchport access vlan 6
switchport voice vlan 200
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape  10  0  0  0
priority-queue out
mls qos trust device cisco-phone
mls qos trust cos
no mdix auto
spanning-tree portfast

Thanks,

Jaime

3 REPLIES
Hall of Fame Super Red

Re: 7936 IP Conference Station IP load 3-3-16

Hi Jaime,

Just for a test can you try one port set as;

switchport access vlan 200 (with no voice vlan)

We have had some success with this config on certain

Network designs.

Cheers!

Rob

New Member

Re: 7936 IP Conference Station IP load 3-3-16

Hi Rob,

Had no luck, same issue.  Phone takes forever to load.  Is there a way to manually push the load files to the 7936 like you can to the 7960s, 7970s?  Just so I can test different load files.  Let me know what you think.  Thanks!  Jaime

Hall of Fame Super Red

Re: 7936 IP Conference Station IP load 3-3-16

Hi Jaime,

Well it was worth a try

The 7936 Device>Phone config page has a section for specifiying

a Firmware load that differs from the device defaults just like the other

phone models. You can test the new firmware without changing all the

7936's.

Cheers!

Rob

185
Views
0
Helpful
3
Replies