Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

7940G and Expansion Module 7914

The expansion Module 7914 can Work with IP Phone 7940G?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: 7940G and Expansion Module 7914

Hi William,

Ajaz is correct :) Mant people have tried this setup over the past few years but it will not work. Have a look towards the end of this doc (I believe the 7914 is only compatible with 7960,7961,7970,7971);

http://www.cisco.com/en/US/products/hw/phones/ps379/products_administration_guide_chapter09186a008066e11e.html

Hope this helps!

Rob

2 REPLIES
Silver

Re: 7940G and Expansion Module 7914

according to this data sheet on the 7914, it would appear not to be supported.

hth,

Ajaz

Hall of Fame Super Red

Re: 7940G and Expansion Module 7914

Hi William,

Ajaz is correct :) Mant people have tried this setup over the past few years but it will not work. Have a look towards the end of this doc (I believe the 7914 is only compatible with 7960,7961,7970,7971);

http://www.cisco.com/en/US/products/hw/phones/ps379/products_administration_guide_chapter09186a008066e11e.html

Hope this helps!

Rob

174
Views
0
Helpful
2
Replies
CreatePlease to create content