Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7941 no audio

Hi experts,

Got 1 phone which is faulty! no audio/sound!

we got 3 offices, lets say Site A where the CM is located), site B & site C.

this faulty phone is in Site A, when used within site A, it's working well.

However when calling Site B & C, there's no sound/audio. testing shows that its codec is also g.729 as a normal call between each site. also only this phone have this problem! so I would say it's not the firmware (correct me if i'm wrong). also done a factory reset, but still the same.

firmware: SCCP41.8-3-4SR1S

Any more troubleshooting ideas?

thnx

7 REPLIES

Re: 7941 no audio

Does it happen to be on a different IP Subnet then all the other phones? If it is, I would say bad routing configuration..

HTH

Chad

New Member

Re: 7941 no audio

Nope, it's on the same subnet. it is the only one that have this issue. all other are working well. also the hardware is working well within Site A.

any bugs related to this?

helps!

New Member

Re: 7941 no audio

Testing shows that when we use codec g.711, all is working well bet the 3 sites but when g.729 is used, there's no audio between each site even within site A.

need help!

thnx

New Member

Re: 7941 no audio

Hopefully someone there have any troubleshooting tips on this issue? cannot log to TAC since our contract has expired.

thnx

Re: 7941 no audio

Oh if thats the case I can almost bet its a Transcoding issue! Are Media Resource's configured?

New Member

Re: 7941 no audio

of course they are! only this phone has the problem, all the other phones works well with codecs g.729 & g.711.

Or there is a media resource configuration on this specific ip phone unit (7941)? details pls...

any more troubleshooting tips?

Thnx

New Member

Re: 7941 no audio

Help anyone?

Note: only this single unit have this issue.

other same unit works well.

tia

281
Views
0
Helpful
7
Replies