Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

7941 phones w/ UC520 loosing time

Where do phones connected to a UC520 get their time? I have a site where all phone display's are off by 4 min.

The IOS is set to use a .gov NTP.

And Unity Ex is set to use the same NTP

CCME is coded in system time, yet all seem off

1 REPLY

Re: 7941 phones w/ UC520 loosing time

The phones get their time via SCCP messages which are based off of the UC520 clock.

Use these commands to make sure your NTP is configured correctly:

show ntp association

show clock

Otherwise, you can try upgrading your phone firmware as that fixes a large percentage of time problems (notably DST).

hth,

nick

117
Views
0
Helpful
1
Replies
CreatePlease to create content