I am attempting to install new 7941-G-GE phone and all I get is the green speaker light and on a regular basis the handset, lines and mute buttons will blink. At this same time apparently it looses the connection to the switch. The LCD has not displayed anything at this point.
The TFTP server has been created and equipped with the files; still there is no progress with the phone. DHCP has also been updated to point to the TFTP server for option 150. The TFTP server does not show any activity from the phone but has been accessed to confirm that it is operational.
Sorry for the inconvenience. My bad in incorrectly checking the wrong switch for IOS ver. Apparently this test switch was not upgraded and had only 12.1. I placed the phone on our production side and it booted up. Thanks for your assistance.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...