Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7941G and 7970G converting to SIP

Hi,

 

Does anyone know how to convert either a 7941G or 7970G to SIP....All I want to do is test a new SIP trunk I have that is mapped to a local number. I have a Linksys WAN300 ADSL router connected to BT broadband, a Laptop and a 7941G connect to the WAN300 switch ports....All I want to do is use either the 7970 or 7941 in standalone mode....Can this be done? TAC have said it can be done but their do not support it. They only support the 7940 and 7960's to work in standalone mode.

 

Can anyone help.

 

Kind Regards

James

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: 7941G and 7970G converting to SIP

Hi James,

That's correct, we only support the following phones running SIP with a third party proxy:

     7905, 7912, 7940 and 7960.

The process for this is detailed at the following:

http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a0080094584.shtml

No support is provided for using the other 7900 series phones with 3rd party proxies.  It looks like others have tried this though - I saw the following on Google:

http://www.tjir.za.net/7970-sip.html

Andy

4 REPLIES
Cisco Employee

Re: 7941G and 7970G converting to SIP

Hi James,

That's correct, we only support the following phones running SIP with a third party proxy:

     7905, 7912, 7940 and 7960.

The process for this is detailed at the following:

http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a0080094584.shtml

No support is provided for using the other 7900 series phones with 3rd party proxies.  It looks like others have tried this though - I saw the following on Google:

http://www.tjir.za.net/7970-sip.html

Andy

New Member

Re: 7941G and 7970G converting to SIP

Thanks Andy I will give this google link a go and report back....Many Thanks....James

New Member

Re: 7941G and 7970G converting to SIP

Hi Andy or whoever can help.

I have managed to get my hands on a 7905G do I just need to follow the instructions for the 7940/7960 link you have published here?

Thanks

James

Cisco Employee

Re: 7941G and 7970G converting to SIP

Hi James,

I believe so, take a look at the following too:

http://www.cisco.com/en/US/docs/voice_ip_comm/bts/5.0/protocol/guide/92apxphn.html#wp1008016

Andy

6698
Views
0
Helpful
4
Replies
CreatePlease login to create content