Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

7941GE with ccme

Hi all,

i'm not able to load the network-locale IT and user-local IT on ip phone 7941G-GE.

Actually, the ephone has type parameter set to 7941GE, and cnf file are already create (create cnf-file command).

All fine with 7940, 7912.... ecc. ecc.

Any idea?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: 7941GE with ccme

Hi,

the 7941 needs the mk locatization file and the tones xml file. Download the files from CCO, CCME section, and put them on the router. Then configure tftp-server as needed, eg:

tftp-server flash:/phoneloads/it-td-sccp.jar alias Italian_Italy/td-sccp.jar

tftp-server flash:/phoneloads/it-tc-sccp.jar alias Italian_Italy/tc-sccp.jar

tftp-server flash:/phoneloads/it-mk-sccp.jar alias Italian_Italy/mk-sccp.jar <-- just this for 7941

tftp-server flash:/phoneloads/g3-tones.xml alias Italy/g3-tones.xml

Hope this helps, if so please rate post!

9 REPLIES
Hall of Fame Super Gold

Re: 7941GE with ccme

Hi,

the 7941 needs the mk locatization file and the tones xml file. Download the files from CCO, CCME section, and put them on the router. Then configure tftp-server as needed, eg:

tftp-server flash:/phoneloads/it-td-sccp.jar alias Italian_Italy/td-sccp.jar

tftp-server flash:/phoneloads/it-tc-sccp.jar alias Italian_Italy/tc-sccp.jar

tftp-server flash:/phoneloads/it-mk-sccp.jar alias Italian_Italy/mk-sccp.jar <-- just this for 7941

tftp-server flash:/phoneloads/g3-tones.xml alias Italy/g3-tones.xml

Hope this helps, if so please rate post!

New Member

Re: 7941GE with ccme

Hi,

tomarrow i test it.... But i think this is the right solution...

Thank you

New Member

Re: 7941GE with ccme

Hi,

another question:

The IPPhone 7941 is not syncronize with CCME hours (two hours of delay) and the CPTONE is US again.

However, dictionary is in italian language .

Any Idea?

Thanks

Hall of Fame Super Gold

Re: 7941GE with ccme

Hi,

do you have time-zone 23 under telephony service ?

For tone, check the g3-tones.xml file above. Note, the localized dialtone is played when dialing from off-hook, after pressing the digit configured in "secondary-dialtone". The primary is always continuous, to distinguish with secondary.

Hope this helps, if so please rate post!

New Member

Re: 7941GE with ccme

Hi,

I have already configured "time-zone 23" under telephony service.

Time on ipphone 7912 is right!

Hall of Fame Super Gold

Re: 7941GE with ccme

Ok, what FW are you running on the phone? Please upgrade to latest 8.2(2)SR1 and try again.

New Member

Re: 7941GE with ccme

Actually, no advanced feature are running on the phone.

Customer can browse the local directory only!

The software that is running is 8.0.4

Hall of Fame Super Gold

Re: 7941GE with ccme

Ok, checklist for correct time on CCME:

* reccomended, set ntp to a vaid server:

net server 4.2.2.1 (yes that addrees is valid!)

* your timezone and DST for router purposes

clock timezone CET 1

clock summer-time CST recurring last Sun Mar 2:00 last Sun Oct 3:00

* timezone for CCME

telephony-service

time-zone 23

Now, I thought that 8.0.4 should give no problem in that area, but you fuond it does.

Can you upgrade to 8.2(2)SR1 and try again

My phones are working correctly with that release.

New Member

Re: 7941GE with ccme

Hi Paolo,

I need to upgrade to 8.2(2).

I will give you a feedback!

Regards

Diego

261
Views
5
Helpful
9
Replies
CreatePlease to create content