09-14-2010 07:40 AM - edited 03-16-2019 12:45 AM
We recently uploaded the firmware for 7942/7962 using the .sgn file to a ccm 5.1.2 cluster. The upload was successful but the device is still not available for use even after restarting the TFTP service and rebooting the Publisher. Any thoughts would be appreciated.
09-14-2010 09:26 AM
Hi Linda,
If the 7942 is not listed in the Device defaults or the Add/New phone model 7942
then you will need to add the device pack instead of just the 7942 Firmware. It looks
like the device pack below would add the 7942 in CUCM 5.1(2)
Cisco Unified CallManager Device Package 5.1.2 (3128-1)
Release Notes
http://www.cisco.com/web/software/282074299/18326/cmterm-devicepack-5_1_2_3128_readme.html
Cheers!
Rob
09-15-2010 10:27 AM
Hi Rob,
That did the trick! Thanks for the suggestion.
Linda
09-15-2010 10:37 AM
Hi Linda,
You are most welcome Glad that worked for you.
Cheers!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: