Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

7942 Firmware

Hi,

where can i find the firmware loads for 7942 and 7962 phones.

I checked in Cisco but m not able to find it.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: 7942 Firmware

You need a support contract to downlaod software from CCO.

If you have it, the FW is under "voice software" - "Cisco Ip phone 7900 firmware".

If you don't have a support contract, you can buy one from any official cisco reseller.

4 REPLIES
Hall of Fame Super Gold

Re: 7942 Firmware

You need a support contract to downlaod software from CCO.

If you have it, the FW is under "voice software" - "Cisco Ip phone 7900 firmware".

If you don't have a support contract, you can buy one from any official cisco reseller.

New Member

Re: 7942 Firmware

hi,

thanks for your reply i found the firmware. one query will it work with ccme??

Hall of Fame Super Gold

Re: 7942 Firmware

Yes it will.

Thanks for the nice rating and good luck!

Hall of Fame Super Red

Re: 7942 Firmware

Hi Sandeep,

Just thought that I would add this note to the great info from my friend Paolo;

Q. What Cisco Unified Communications Manager Express release is required for the phones?

A. The Cisco Unified IP Phone 7962G and 7942G models are first supported by Cisco Unified Communications Manager Express Version 4.1, Cisco IOS Software Release 12.4(15)T (available now).

From this good Q&A doc;

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/ps8536/prod_qas0900aecd80699c20.html

Hope this helps!

Rob

421
Views
0
Helpful
4
Replies