I've got the Abbrdial (abbreviated dial) setup ok, but maybe I'm missing something over the years because it rarely comes up.
On a phone like the 7942 that only has 2 soft buttons, I don't see any easy way to setup speed dials that are a "list". Meaning, I can setup abbrdials and the user just has to remember that hitting "1" then "AbbrDial" will call that person they assigned to "1". But it isn't as simple as the PAB, but getting to the PAB is a button chore in itself.
We have other systems that allow speed dialing so much easier than this CUCM system (or so it would seem).
So...is there some simpler way on a 7942 to get to speed dials or the PAB on their phone from the main screen that only involves a click or 2?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...