Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

7945, 7965 phones - wrong time on display

I have applied the workaround DST patch for March 2009 to correct the time on all the new 7945-7965-7975 IP phones. However, now any new phone I add is getting the wrong time by 3 hours ahead of EST(-5). I am currently running one publisher and two subscribers on CUCM 6.1(2).

My question is, can I apply CUCM 6.1(2)SU1a to resolve the DST time problem for all the new phones?

1 REPLY
Green

Re: 7945, 7965 phones - wrong time on display

The original problem was for first and second generation phones:

http://www.cisco.com/en/US/customer/ts/fn/632/fn63213.html

Cisco Unified Communications Manager does not send Daylight Saving Time updates for Time of Day routing (ToD) and for these Cisco IP Phone models: CP-7905, CP-7910, CP-7912 CP-7920, CP-7921, CP-7925, CP-7935, CP-7936, CP-7937, CP-7940, CP-7960, CP-7985

1. Which firmware those phones are using?

2. Whats the time of the cucm server?

2a Using NTP

3. Only new phones, and existing ones show correct time?

Thanks

1806
Views
0
Helpful
1
Replies
CreatePlease to create content